Tahitian Cutter
(REF# 54205)
This boat has been sold
12.5m (41'0"), 1980, 1 x diesel 28hp
Steel Construction, Long Keel underwater profile, 5 berths
|
| Extra Details
| Designer: | |
| Builder: | C. Gendron |
| Fuel capacity: | 1 x 273 ltr (60.0 USG) |
| Water capacity: | 1 x 182 ltr (40.0 USG) |
| Deadrise: | 5-10 degrees |
| Last survey: | 06/09/2005 |
|
|
Mechanical
1 x diesel 28hp, Isuzu 2 Cyl. (1980)
fresh-water cooled,
tiller steering,
shaft drive, 3 blade Campbell "Sailor" low drag with prop(s).
Fuel consumption (approx) 3ltrs/hour,
Cruising speed 5 knots,
Max speed 6 knots.
Velvet drive transmission.
Large Engine room with plenty of space on all sides for maintenance and storage.
|
|
Electrical Systems
12 volt, 2 batteries charged by: engine
|
|
| Dimensions
| LOA: | 12.5m (41'0") |
| LWL: | 11.1m (36'6") |
| Beam: | 3.2m (10'5") |
| Draft Min: | 0.0m (0'0") |
| Draft Max: | 1.5m (4'9") |
| Displacement: | 7,210kg (15,898.1lbs) |
| Headroom: | 1.9m (6'2") |
| Storage: | On mooring |
|
| Construction
Steel Construction with Long Keel underwater profile, paint finish.
Steel Hull Tahitian Double End Cutter with outboard Rudder in great condition.
Hull is welded steel multi-chin with long straight Keel.
No evidence of any rust on hull welds. |
| Rig
Cutter rigged Aluminium spars (1982), with Stainless Steel standing rigging (1982) |
| Sails
Slab reefing mainsail UK (1980)
Hank On headsail (unknown year)
Other sails:
Spinnaker (unknown year)
2 Yankee Jibs (unknown year)
Storm Staysail (unknown year)
Storm Jib (unknown year)
Spinnaker gear,
2 halyard winches,
4 sheet winches
Total 6 sails all in very good condition.
2 large poles for tradewind sailing, part of selfsteering rig to be mounted on rudder W/O wind Vane.
Oversize Rigging. |
| Accommodation
5 berths with 2 doubles and 1 singles in 1 cabin(s).
3 burner propane cooker, Cabin heating, Non-Smokers
1 heads (Manual), 1 sink.
Manual water system
Fresh water wash
Cockpit shower
Spacious Galley with plenty of storage.
Shower in head with seperate holding tank.
Woodstove in Salon works excellent. |
|
| Nav Equipment
Compass, Speed, Log, Depth sounder, VHF, GPS, Navigation lights
Eagle Z-9500 Loran C/sounder, Realistic MTX-101 Marine VHF Radio, Garmin GPS-Map 76 hand held GPS, Danforth Double Bubble Compass with steel boat compensation.
|
| Deck Gear
3 anchors (45 CQR, 45 Grapple, 20 Danforth),
20 metres of chain,
100 meters of rode,
Sail cover, Rode, Fenders, Boathook, Davits, Swim Ladder, Instrument Covers, manual Simpson windlass,
Gendron windvane self-steering system.
dinghy (unknown year) (Hard Dinghy). |
| Fishing
Deck is welded steel with non-skid coating.
Clean tidy deck with generous storage.
Small Cockpit appreciated offshore travel.
|
|
| Toys
|
| Safety Equipment
Life buoys, Safety harnesses, Horn, Swim ladder, 2 bilge pumps (1 manual / 1 electric) |
| Lying
VANCOUVER ISLAND |
| Broker's Comments
Register with Boatshed to see 57 extra photos of this Tahitian Cutter.
Looking for an affordable offshore cruiser? Here she is, a Steel hulled Tahitian double end Cutter with oversize rigging in very good condition with 6 sails.
This vessel is a bargain at the current asking price considering her configuration and inventory, the owner's are motivated to sell quickly as they have other interests.
She will need a few updates for offshore usage but the potential is definatly there as she has a solid hull, strong engine, and all the right rigging.
Assumable moorage may be available on Vancouver Island.
Call to set up a viewing for her today!
These boat details are subject to contract.
Note: Offers on the asking price may be considered.
This Tahitian Cutter has been personally photographed and viewed by Glen Christie of Boatshed Vancouver. Click here for contact details. |
|
